The Parkside PDKS manual scroll saw is popular for its excellent high quality construction, great ergonomics and even the capability to quickly adjust in different work settings. The Parkside PDKS manual scroll saw is also very handy for light duty cutting. This saw is equipped with a versatile variable speed blade that can be easily adjusted. This saw comes with a durable dual blade system that is ideal for cutting both soft and hard woods. This saw can be used to perform both straight and curved cuts with ease. This saw is also extremely accurate and has been tested over again.
If you are looking for a saw that is portable and lightweight, then the Parkside PDKS 120 B3 scroll saw is the best one available. The heavy duty saw that comes with this saw is perfect for professional woodworkers and craftsmen who work with large pieces of wood. These saws are made with dual blades, one with a fine tooth pattern. They also come with a dust blowing tube and can be used with or without dust collection bags. The dust collection bags can come in handy if you need to clean up the motor while it is in use.
The following general safety advice should help you when operating this saw. The main parts of this saw are the blade assembly, the blade guard. You should always read the instructions carefully before you start operating your saw.
The blade guard should be positioned on the top of the blade at the appropriate place. On the saw’s table, you will see two small knurled nuts, the ones with the flat end. These nuts should be removed carefully and placed at the edge of the blade. Now the blade guard should be attached to the knurled nuts. Then you need to attach the blade to the saw.
Another general safety advice is to be sure that your work surface has been turned off. As long as your work surface is turned off, the chances are that you might have an electrical power tool running in the room. If you do have an electric power tool running in the room and no one is around to turn it off, you should disconnect the mains lead from the mains socket. You can do that by unscrewing the bolts at the back of the socket.
Then you need to pull the plug away from the wall. At this point you may hear popping sounds or you might experience a sudden pressure. This is your mains plug coming free from the wall. Now you should place the blades on the workpiece and turn the mains lead forwards and backwards. Do not try to pull the lead away from the wall, as this will cause a dangerous drop.
The last step is to place the screws back into their respective screws. You can now remove your Figuurzaag Electric Drill in one smooth motion. However, this drill has a dual action feature that can be useful for the purpose of drilling through the various layers of wood without any difficulty. For this purpose, you can opt for the double action drill, which has a single handle.
Once you have successfully removed your Parkside Figuurzaag Electric Drill, you can now install the blade and the cap. After placing all the components back, screw the blade into its appropriate slot and screw the cap in. It is now ready for use. Installing blades should be done by people who are conversant with electrical installations. If in doubt, you can always seek help from professionals.