How to refinish a wood kitchen countertop is an important topic for many homeowners. While it’s possible to spend hundreds of dollars to professionally install a brand new wood countertop, the value can quickly diminish if the surface starts to look old and weathered. Refinishing wood kitchen countertops is actually quite simple – provided you’re careful and have all the proper supplies.
Many homeowners do not realize that the first step to refinishing wood countertops is preparing and cleaning the surfaces to get rid of any existing stains and dirt. Wood kitchen countertops are often used in combination with metal counter tops in order to help reduce heat transfer. Wood countertops combine beautifully with clear plastic and white cabinetry, as well as black cabinetry and stainless steel appliances.
It’s important to choose the right type of wood kitchen countertop material for your particular kitchen design. You’ll need to consider whether you want a natural, creamy appearance, or a darker, rich appeal. Natural wood countertops are very sleek and smooth, while the darker shades are more textured. Each type has its own unique properties that will affect how the countertop looks and feels. For example, a thicker, more tightly-grained wood will feel more solid and retain its new look longer than a lighter, more delicate wood would.
The next thing you need to know about wood countertops is that there are several different types available. For example, there are several types of oak available including white, red, and black. Popular choices include solid oak and strip wood countertops. Solid oak kitchen countertops are sturdy, long lasting, and naturally resistant to chipping and cracking. They’re also more expensive than some other types of wood countertop.
There are two types of finishes you can choose from for wood countertops. One type is oil-based, which requires a special cleaner and is easier to clean up afterward. The second type of finish, known as water-based, penetrates the surface more thoroughly and is less likely to leave behind a film. Water-based finishes are recommended for use in a bathroom, because they are easy to remove and won’t leave any residue behind. Oil-based finishes, on the other hand, are recommended for use on wood countertops in the kitchen. Because they penetrate the surface more deeply, they are the preferred choice for cookware in high-end restaurants.
After choosing the type of finish you want to use, you need to learn how to refinish a wood countertop. To do this, you must first use a dull knife on the wood surface to cut away any excess material. You should also wear protective gloves so you don’t get any finger scratches or cut yourself open on the wood’s surface. Once the surface is smooth and flat, apply the cleaner to the surface in thin even strokes. You can apply as many layers as you want, but only if the surface is smooth and flat.
When you have finished with the initial application of the cleaner, reapply a thin coat of finish to help seal the layer and make it last longer. If there are deep scratches in the wood, such as those that resulted from spilled drinks or something else that was dropped on the countertop, you can sand the area until the scratch is no longer visible. If there are deep scratches caused by heavy items on your wood counters, use a wood polisher to get the scratches smooth again. Sanding and polishing should be done regularly, especially if the wood has been used heavily over time. This will help the wood countertop last for many years.
If you have created deep scratches in the wood that you cannot sand away, you may need to consult a professional before you attempt to refinish a wood countertop. In some cases, these deep scratches can only be repaired through a DIY finish, but in other cases they may require the services of a professional refinisher. For more information on how to refinish a wood countertop, see the Remodeling Help section below.